Indirect Light Molding QL027 VL

LED strip not included. It must be purchased separately, it can be glued directly on the molding.

Allows the use of LED strips 12V – 24V or 220V.

Material HDPS Premium, OPAQUE – ANTI MOISTURE – EXTRA STRONG – SHOCK RESISTANT.

Color: primed in matte white, it is recommended to paint once placed for a professional finish without joints.

Dimensions: 200 x 11 x 11 cm, the pieces are easily joined together.

Minimum order 5 units. 1 unit is 2 meters so 5 units are 10 linear meters.

CHARACTERISTICS OF THE LIGHTING MOLDINGS
– Profiles manufactured for indirect lighting are completely opaque. This means that unlike most similar products available on the market, no light can pass through them.
– Both the 2-meter and 2.40-meter pieces are easily joined together and allow for quick and clean installation. They do not require additional profiles or guides during assembly, but are glued directly to the wall or ceiling.
– They resist the heat emitted by the LED strip, so an aluminum profile is not necessary.
– They come with a white primer coat from the factory, which allows for easy painting once installed.
– The material of which it is composed offers the possibility of sanding, very useful for the final finishing touches during installation.
– The HDPS used to manufacture these moldings is extremely dense and compact, offering a very high resistance to shocks, which allows us to place these moldings in transit areas, on the floor, wall or ceiling.

ASSEMBLY OF OUR MOLDINGS FOR INDIRECT LIGHT
1. Cutting: Cut to size. The material can be cut with hand saw and miter saw or with electric miter saw, for the latter option we recommend the use of telescopic machine and aluminum disc, always make quick and precise cuts.
2. Assembly: pieces can be joined together by applying Mardom Fix Pro multipurpose adhesive, mitered joints are recommended for a professional finish.
3. Finish: Fill all joints and irregularities with the same adhesive. Remove excess adhesive immediately after application before it dries with a damp cloth. ELASTIPLUS paste can be used for a more professional finish.
4. Sanding: Sand excess adhesive if necessary.
5. Finish: Paint the whole piece with any water based paint.

Carrito de compra